From 601558603c623a421d2b13d8a929dce6e7e3805b Mon Sep 17 00:00:00 2001
From: Urs Rudolph <urs.rudolph@gmail.com>
Date: Fri, 19 Dec 2025 14:50:18 +0100
Subject: [PATCH] Added Config for nano with syntax highlighting

---
 nanorc/.config/nano/nanorc | 348 +++++++++++++++++++++++++++++++++++++
 1 file changed, 348 insertions(+)
 create mode 100644 nanorc/.config/nano/nanorc

diff --git a/nanorc/.config/nano/nanorc b/nanorc/.config/nano/nanorc
new file mode 100644
index 0000000..5503dfb
--- /dev/null
+++ b/nanorc/.config/nano/nanorc
@@ -0,0 +1,348 @@
+## Sample initialization file for GNU nano.
+##
+## For the options that take parameters, the default value is shown.
+## Other options are unset by default.  To make sure that an option
+## is disabled, you can use "unset <option>".
+##
+## Characters that are special in a shell should not be escaped here.
+## Inside string parameters, quotes should not be escaped -- the last
+## double quote on the line will be seen as the closing quote.
+
+## If you want ^F, ^B, M-F and M-B to do what they did before version 8.0:
+# bind ^F forward main
+# bind ^B back main
+# bind M-F formatter main
+# bind M-B linter main
+
+## Make 'nextword' (Ctrl+Right) and 'chopwordright' (Ctrl+Delete)
+## stop at word ends instead of at beginnings.
+# set afterends
+
+## When soft line wrapping is enabled, make it wrap lines at blanks
+## (tabs and spaces) instead of always at the edge of the screen.
+# set atblanks
+
+## Automatically indent a newly created line to the same number of
+## tabs and/or spaces as the preceding line -- or as the next line
+## if the preceding line is the beginning of a paragraph.
+# set autoindent
+
+## Back up files to the current filename plus a tilde.
+# set backup
+
+## The directory to put unique backup files in.
+# set backupdir ""
+
+## Use bold text instead of reverse video text.
+# set boldtext
+
+## Treat any line with leading whitespace as the beginning of a paragraph.
+# set bookstyle
+
+## The characters treated as closing brackets when justifying paragraphs.
+## This may not include any blank characters.  Only closing punctuation,
+## optionally followed by these closing brackets, can end sentences.
+# set brackets ""')>]}"
+
+## Automatically hard-wrap the current line when it becomes overlong.
+# set breaklonglines
+
+## Do case-sensitive searches by default.
+# set casesensitive
+
+## Interpret digits given on the command line after a colon after a filename
+## as the line number to go to in that file.
+# set colonparsing
+
+## Constantly report the cursor position, in the status bar or minibar.
+# set constantshow
+
+## Use cut-from-cursor-to-end-of-line by default.
+# set cutfromcursor
+
+## Do not use the line below the title bar, leaving it entirely blank.
+# set emptyline
+
+## Set the target width for automatic hard-wrapping and for justifying
+## paragraphs.  If the specified value is 0 or less, the wrapping point
+## will be the terminal's width minus this number.
+# set fill -8
+
+## Draw a vertical stripe at the given column, to help judge text width.
+## (This option does not have a default value.)
+# set guidestripe 75
+
+## Remember the used search/replace strings for the next session.
+# set historylog
+
+## Display a "scrollbar" on the righthand side of the edit window.
+# set indicator
+
+## Scroll the buffer contents per half-screen instead of per line.
+# set jumpyscrolling
+
+## Display line numbers to the left (and any anchors in the margin).
+# set linenumbers
+
+## Enable vim-style lock-files.  This is just to let a vim user know you
+## are editing a file [s]he is trying to edit and vice versa.  There are
+## no plans to implement vim-style undo state in these files.
+# set locking
+
+## Fall back to slow libmagic to try and determine an applicable syntax.
+# set magic
+
+## The opening and closing brackets that are found by a matching-bracket
+## search.  This may not contain blank characters.  The opening brackets
+## must come before the closing ones, and they must be in the same order.
+# set matchbrackets "(<[{)>]}"
+
+## Suppress the title bar and show the filename plus a cursor-position
+## percentage in the space of the status bar.
+# set minibar
+
+## Enable mouse support, if available for your system.  When enabled,
+## mouse clicks can be used to place the cursor, set the mark (with
+## two clicks), and execute shortcuts.  The mouse will work in the
+## X Window System, and on the console when gpm is running.
+# set mouse
+
+## Switch on multiple file buffers (inserting a file will put it into
+## a separate buffer).
+# set multibuffer
+
+## Don't convert files from DOS/Mac format.
+# set noconvert
+
+## Don't display the helpful shortcut lists at the bottom of the screen.
+# set nohelp
+
+## Don't automatically add a newline when a file does not end with one.
+# set nonewlines
+
+## Set operating directory.  nano will not read or write files outside
+## this directory and its subdirectories.  Also, the current directory
+## is changed to here, so any files are inserted from this dir.  A blank
+## string means the operating-directory feature is turned off.
+# set operatingdir ""
+
+## Remember the position of cursor and anchors for the next editing session.
+# set positionlog
+
+## Preserve the XON and XOFF keys (^Q and ^S).
+# set preserve
+
+## The characters treated as closing punctuation when justifying paragraphs.
+## This may not contain blank characters.  Only these terminating characters,
+## optionally followed by closing brackets, can end sentences.
+# set punct "!.?"
+
+## Make status-bar messages disappear after 1 keystroke instead of after 20.
+# set quickblank
+
+## The regular expression that matches quoting characters in email
+## or line-comment introducers in source code.  The default is:
+# set quotestr "^([ 	]*([!#%:;>|}]|//))+"
+
+## Try to work around a mismatching terminfo terminal description.
+# set rawsequences
+
+## Fix Backspace/Delete confusion problem.
+# set rebinddelete
+
+## Do regular-expression searches by default.
+## Regular expressions are of the extended type (ERE).
+# set regexp
+
+## Save a changed buffer automatically on exit; don't prompt.
+# set saveonexit
+
+## Put the cursor on the highlighted item in the file browser, and
+## show the cursor in the help viewer; useful for people who use a
+## braille display and people with poor vision.
+# set showcursor
+
+## Make the Home key smarter: when Home is pressed anywhere but at the
+## very beginning of non-whitespace characters on a line, the cursor
+## will jump to that beginning (either forwards or backwards).  If the
+## cursor is already at that position, it will jump to the true start
+## of the line (the left edge).
+# set smarthome
+
+## Spread overlong lines over multiple screen lines.
+# set softwrap
+
+## Use this spelling checker instead of the internal one.  This option
+## does not have a default value.
+# set speller "aspell -x -c"
+
+## Use the end of the title bar for some state flags: I = auto-indenting,
+## M = mark, L = hard-wrapping long lines, R = recording, S = soft-wrapping.
+# set stateflags
+
+## Use this tab size instead of the default; it must be greater than 0.
+# set tabsize 8
+
+## Convert each typed tab to the fitting number of spaces.
+# set tabstospaces
+
+## Snip whitespace at the end of lines when justifying or hard-wrapping.
+# set trimblanks
+
+## Save files by default in Unix format (also when they were DOS or Mac).
+# set unix
+
+## The two single-column characters used to display the first characters
+## of tabs and spaces.  187 in ISO 8859-1 (0000BB in Unicode) and 183 in
+## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
+## The default when in a UTF-8 locale:
+# set whitespace "»·"
+## The default otherwise:
+# set whitespace ">."
+
+## Detect word boundaries differently by treating punctuation
+## characters as parts of words.
+# set wordbounds
+
+## The characters (besides alphanumeric ones) that should be considered
+## as parts of words.  This option does not have a default value.  When
+## set, it overrides option 'set wordbounds'.
+# set wordchars "<_>."
+
+## Let an unmodified Backspace or Delete erase the marked region (instead
+## of a single character, and without affecting the cutbuffer).
+# set zap
+
+## Hide the bars plus help lines and use the whole terminal as edit area.
+# set zero
+
+
+## Paint the interface elements of nano.  These are examples; there are
+## no colors by default, except for errorcolor and spotlightcolor.
+# set titlecolor bold,white,blue
+# set promptcolor lightwhite,grey
+# set statuscolor bold,white,green
+# set errorcolor bold,white,red
+# set spotlightcolor black,lightyellow
+# set selectedcolor lightwhite,#804
+# set stripecolor ,#444
+# set scrollercolor slate,#222
+# set numbercolor cyan
+# set keycolor cyan
+# set functioncolor green
+
+## In root's .nanorc you might want to use:
+# set titlecolor bold,white,magenta
+# set promptcolor black,yellow
+# set statuscolor bold,white,magenta
+# set errorcolor bold,white,red
+# set spotlightcolor black,orange
+# set selectedcolor lightwhite,cyan
+# set stripecolor ,yellow
+# set scrollercolor magenta
+# set numbercolor magenta
+# set keycolor lightmagenta
+# set functioncolor magenta
+
+
+## === Syntax coloring ===
+## For all details, see 'man nanorc', section SYNTAX HIGHLIGHTING.
+
+## To include most of the existing syntax definitions, you can do:
+include /usr/share/nano/*.nanorc
+include "/usr/share/nano/extra/*.nanorc"
+
+## Or you can select just the ones you need.  For example:
+# include /usr/share/nano/html.nanorc
+# include /usr/share/nano/python.nanorc
+# include /usr/share/nano/sh.nanorc
+
+## In /usr/share/nano/extra/ you can find some syntaxes that are
+## specific for certain distros or for some less common languages.
+
+
+## If <Tab> should always produce four spaces when editing a Python file,
+## independent of the settings of 'tabsize' and 'tabstospaces':
+# extendsyntax python tabgives "    "
+
+
+## === Key bindings ===
+## For all details, see 'man nanorc', section REBINDING KEYS.
+
+## If you want to suspend nano with one keystroke (instead of with ^T^Z):
+# bind ^Z suspend main
+
+## The <Ctrl+Delete> keystroke deletes the word to the right of the cursor.
+## On some terminals the <Ctrl+Backspace> keystroke produces ^H, which is
+## the ASCII character for backspace, so it is bound by default to the
+## backspace function.  The <Backspace> key itself produces a different
+## keycode, which is hard-bound to the backspace function.  So, if you
+## normally use <Backspace> for backspacing and not ^H, you can make
+## <Ctrl+Backspace> delete the word to the left of the cursor with:
+# bind ^H chopwordleft main
+
+## For a more mnemonic Comment keystroke (overriding Cut-from-cursor):
+# bind M-K comment main
+
+## If you want ^L to just refresh the screen and not center the cursor:
+# bind ^L refresh main
+
+## When you sometimes type M-J instead of M-K, or M-T instead of M-R:
+# unbind M-J main
+# unbind M-T main
+## (Those functions are still accessible through ^T^J and ^T^V.)
+
+## For quickly uppercasing or lowercasing the word that the cursor is on.
+## (These effectively select a word and pipe it through a sed command.)
+# bind Sh-M-U "{nextword}{mark}{prevword}{execute}| sed 's/.*/\U&/' {enter}" main
+# bind Sh-M-L "{nextword}{mark}{prevword}{execute}| sed 's/.*/\L&/' {enter}" main
+
+## For copying a marked region to the system clipboard:
+# bind Sh-M-C "{execute}| xsel -ib {enter}{undo}" main
+
+## For copying text to the local clipboard via OSC 52 (if terminal supports it):
+# bind M-* "{execute}|| printf "\033]52;c;%s\007" "$(base64 | tr -d '\n')" {enter}{undo}" main
+
+## For normalizing Unicode to precomposed characters:
+# bind Sh-M-N "{execute}| uconv -x nfc {enter}" main
+
+## For wiping all anchors in a buffer:
+# bind Sh-M-W "{execute}| cat {enter}" main
+
+## For snipping trailing blanks when you save a file:
+# bind ^S "{execute}| sed 's/\s\+$//' {enter}{savefile}" main
+
+## If you would like nano to have keybindings that are more "usual",
+## such as ^O for Open, ^F for Find, ^H for Help, and ^Q for Quit,
+## then uncomment these:
+# bind ^X cut main
+# bind ^C copy main
+# bind ^V paste all
+# bind ^Q exit all
+# bind ^S savefile main
+# bind ^W writeout main
+# bind ^O insert main
+# set multibuffer
+# bind ^H help all
+# bind ^H exit help
+# bind ^F whereis all
+# bind ^G findnext all
+# bind ^B wherewas all
+# bind ^D findprevious all
+# bind ^R replace main
+# unbind ^U all
+# unbind ^N main
+# unbind ^Y all
+# unbind M-J main
+# unbind M-T main
+# bind ^A mark main
+# bind ^P location main
+# bind ^T gotoline main
+# bind ^T gotodir browser
+# bind ^T cutrestoffile execute
+# bind ^L linter execute
+# bind ^E execute main
+# bind ^K "{mark}{end}{zap}" main
+# bind ^U "{mark}{home}{zap}" main
+# bind ^Z undo main
+# bind ^Y redo main